Pair of Weld on Spring Perches for GM, Corp 14 Bolt 3- 3/8" Diameter Tube, 2.5" Wide Spring

Make your axle swap easier and don't bother trying to save your stock, rusty spring perches!

1/4" steel plate construction, fully boxed with 3/16" gussets, won't collapse like the stock 14 bolt perches or other unboxed aftermarket perches.

Drilled to leave the axle in stock location or move the axle forward or back 1" or 1-1/2".

These directly fit semi-float or full-float 14 bolt axles (3-3/8" tubes), they will also fit any axle with a 3-1/2" tube with minor grinder work.

Skip trying to reuse these: 

These perches are great for adjusting pinion angle without having to use shims. This can be done by loosely bolting the springs to the axle and using a jack to adjust the pinion. Then weld in place.