Kevlar Non-Greasable Front Upper Shackle Kevlar Bushing Kit: Bolt, Bushing and Sleeve -  Front Suspension

Kevlar Non-Greasable Front Upper Shackle Kevlar Bushing Kit: Bolt, Bushing and Sleeve - Front Suspension

Greasable Bolts

Greasable Bolts

Non-Greasable Front Upper and Lower Shackle Kevlar Bushing Kit - Front Suspension

Non-Greasable Kevlar front upper and lower shackle bushing kit for '67-87 ('91) GM trucks Includes Kevlar bushings/sleeves/bolts for front shackle hanger (both sides) and rear eye of both front aftermarket springs

$66.00
SKU
GU37015-N
Estimate Fees

Non Greasable Kevlar front upper and lower shackle Kevlar bushing kit for '67-87 K10/K20 pickup, '69-87 Blazer, '67-87 Suburban and '76-87 K30/V30 pickup.

For aftermarket springs.

Uses larger 1/2" bolt, this will require ORD HD front shackles plates or drilling stock shackles for larger bolt.

Comes with grade 8 Non-Greaseable bolts, sleeves, kevlar bushings, and washers.

We've implemented new Kevlar infused polyurethane bushings into our entire lineup, any of our products with suspension bushings in them will now have the best bushings available!

Infusing Kevlar into polyurethane doubles the tensile strength, tear resistance, and increases the life of the part by cross linking the polyurethane. We elected to keep the same durometer (stiffness) so as not to inhibit suspension travel, as well as keeping the black color everyone is used to. Basically with double the tensile strength, the bushing can be pushed harder and still come back to it's original shape. All of that means using your truck more and maintaining it less, and reduces the cost of replacing bushings!

Due to its wide range of elastomeric properties and strength factors, Kevlar Infused polyurethane out handles, out preforms, and outlasts other similar polyurethane materials on the market.

We also added chamfers to make bushing install easier!

(4) ORDB7006 Kevlar Bushing Halves

(2) DOM Sleeves 3.5" long for 1/2" Bolt

(2) Grade 8 bolts with top lock nut. 1/2"-13x5"

(4) ORDB7005 Kevlar Bushing Halves 

(2) DOM Sleeves 3.5" long for 1/2" Bolt

(2) Grade 8 bolts with top lock nut. 1/2"-13x5"