Dana 44 and 10 Bolt High Steer Upgrade Kit
Add High Steer to your crossover steering system!
Current Leadtime 4-6 Weeks
Always bending your tie rod on rocks? Well, it's time to upgrade to High Steer!
High steer moves the tie rod from the stock location to the top of the knuckles out of harm’s way.
All the parts needed to convert your kingpin Dana 60 crossover to high steer.
These High Steer upgrades are designed to work with our 4-7" Kingpin Dana 60 crossover kits. These kits are using GM 1 ton TRE taper.
NOTE: High Steer CAN NOT be used if your axle has been moved forward from the stock location
Unfamiliar with steering terms? Check out this page
Our tie rods are cut to correct length and threaded. Our HD ends come installed.
- Cut to correct length 1.25" DOM High Steer tie rod with our HD Tie rod ends installed
- ARP Studs with nuts (3 of each if orderd for stock knuckle, 4 if aftermarket)
- High Steer Arm
- (2)Grease Zerks
- (2) Cotter pins