Complete Rear Coilover Conversion System for '67-87 ('91) GM Trucks With ORD Custom Valved Fox Coilovers
Brackets/Hardware 7-9 weeks out.
With shock shortages anticipate around 20+ weeks out. The kit can be installed without the shocks by using a piece of DOM as mockup.
When you’re ready to move beyond leaf springs, this is the way. Our link and coilover system lets you enjoy big articulation, 16” of vertical wheel travel AND excellent steering precision and axle wrap control. We have worked with every type of front suspension and this coilover conversion is the only one that does it all:
Outstanding ride quality over any terrain from gravel roads to rocks, sand, and whoops
Total axlewrap control, nothing puts power to the ground like a well designed link suspension
No departure angle limits
Excellent damping from Fox 2.5" reservoir shocks
Easily adjustable spring rates and ride height
This is based around a 2-1/2" Fox remote reservoir coilover shock but we do have many options beyond that!
We can do bigger shocks, internal and external bypasses, bumpstops, the sky is the limit!
WIth our rear coilover set we have a couple options for mounting the shocks. You can either go through the bed and use a longer travel shock (14" or 16") or keep your floor intact with our under bed brackets and a shorter travel shock (10" or 12" depending on lift height).
Each shock with these kits is custom valved to work perfectly with your project.
Coilover aren't just for hardcore offroad rigs, everybody wants their truck to ride nice and with no axle wrap, it's the ultimate setup for any truck!
After order we will give you a call to go over all the details of your build!
Note: When coilovers are purchased through us we will spec the valving and spring rates for you. If you are providing your own coilovers we do not give out spring rate or valving information.