Brakelines for Disc Brake Conversion
Disc brakeline kits, eliminates all the hardline and replaces it with stainless braided lines.
Brakeline kit for rear disc brake conversions.
We've built layer upon layer of strength and protection into our all new, exclusive top-quality, DOT-approved extended braided stainless steel brake line kits!
They have a tough teflon tube at the core, but the next layer is a Kevlar braid, then an extra protection layer, the stainless braid, and then the protective outer vinyl cover. The fittings are all one piece crimp fittings and lines are DOT spec!
On top of all that, all lines are individually pressure tested when they're built so we know they're not going to leak. Our brake lines carry a 1 year warranty.
These kits are for disc-brake rear axles, lifted or stock height.
Our long line kit runs from the t-junction block at the diff cover all the way out to each caliper. This eliminates all of the hard line on the axle and makes for a super clean and easy installation. Includes one 28" line and one 36" line to fit the common GM full floating 14 bolt as the t-junction block is offset to one side. Also includes new banjo bolts, copper washers and clips to retain the lines on the axle housing.
Instead of the standard Keyed fitting at the caliper end our kits use a banjo bolt that can be clocked in any direction. This way you can adjust for frame clearances