We know a lot
of you are fabricators and we have a good collection of unique
and hard to find pieces to create the trick parts you’re after.
Shock tabs
Short
shock tabs, 1.625" from center of hole to tube, 3/16" plate,
these are the tabs we typically use for moving/replacing shock
mounts Price: $2.50 each
Buy Now
Long shock tabs, 2.25" from
center of hole to tube, 3/16" plate, in case you need a longer shock mount.
Price $2.50 each
Buy Now
Spring Hanger Bracket
(also fits
our bushing assemblies): 3" inside, 2 ¼" across, with a 9/16"
hole down 1 ¼" from the inside of the bracket.
Part
#: FAB-001 Price: $12.00
Buy Now
Bushing assemblies:
|
 Consist
of a large diameter outer sleeve with 2 bushing halves
and an inner sleeve all assembled just like a leaf
spring end. Ideal for suspension links, tire carriers,
cage mounts or anything else that needs to pivot or be
removed.
We've
added the BA175HD for the higher stress components or
parts that will see rock strikes such as lower control
arms.
Another option is to make the 1.75" and 2"bushing
assemblies greasable using our Grade 8 greasable 9/16"
bolts. This allows you to keep bushings in rotational
applications properly lubricated. This option adds $5.00
to the overall price.
|
|
Part Number |
Tubing Size |
Length |
Bolt Size |
Price |
|
|
FAB-BA200 |
2"x.120" |
3" |
9/16" |
$13.00 |
Buy Now |
|
FAB-BA175 |
1
¾"x.120" |
3" |
9/16" |
$12.00 |
Buy Now |
|
FAB-BA175GR |
1
¾"x.120" |
3" |
9/16" (Greasable) |
$17.00 |
Buy Now |
|
FAB-BA175HD |
1.875"x.188" DOM |
3" |
9/16" |
$13.50 |
Buy Now |
|
FAB-BA175HD-GR |
1.875"x.188" DOM |
3" |
9/16" (Greasable) |
$18.50 |
Buy Now |
|
FAB-BA150 |
1
½"x.120" |
2 ¼" |
1/2" |
$11.50 |
Buy Now |
|
*FAB-BA100 |
1"x.095" |
1 ½" |
3/8" |
$9.00 |
Buy Now |
*no
sleeve on BA-100
Traction bar axle mounting plates:
This kit is the axle end of a single
ladder style traction bar ready for a do it yourself fabricator.
The plates are laser cut 1/4" with 9/16" holes on 8" centers.
The bushing assemblies are our BA175 and BA175HD (heavy wall HD
outer tube for the bottom mount). The axle radius is 3 3/8" for
the GM 14FF rear axle and can be easily modified for larger
tubes. A 3" tube version is also available for most 1/2T axles.
These mounting plates are also ideal for a link suspension.
#U8050 - pair of plates only for
3" radius axle tube - $25.00
Buy Now
#U8051 - pair of plates only for 3.375" radius axle tube -
$25.00
Buy Now
#U8052 - Traction bar axle mount
kit, includes plates and bushing assemblies for 3" tube: $46.00
Buy Now
#U8053 - Traction bar axle mount kit, includes plates and
bushing assemblies for 3.375" tube: $46.00
Buy Now
#U9019 - High steer cylinder
mount kit, for use with high steer hydro assist, includes
spacers for the heim joint on the assist cylinder: $35.00
Buy Now
Choose the
category you would like more information on.
|
